HP ProLiant DL380 G3 Server - Manual (Page 140)

140 HP ProLiant DL380 Generation 3 Server User Guide
4. Power up the server ("Powering Up the Server" on page 37).
a. The server generates one long beep and two short beeps to indicate that
you are in disaster recovery mode. If the diskette is not in place, the
system continues to beep until a valid ROMPaq diskette is inserted.
b. The ROMPaq diskette flashes both system ROM images. If successful, a
sequence of ascending audible beeps is generated. If unsuccessful, a
sequence of descending audible beeps is generated and you need to
repeat the disaster recovery process.
5. Power down the server ("Powering Down the Server" on page 37).
6. Remove the ROMPaq diskette.
7. Power up the server ("Powering Up the Server" on page 37).
Other Information Resources
For additional troubleshooting information, refer to the Servers Troubleshooting
Guide on the Documentation CD.
For information on warranties and service and support upgrades (Care Pack
services), refer to the HP website (
http://www.hp.com/support ).
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM