HP ProLiant DL380 G3 Server - Manual (Page 113)

Server Configuration and Utilities 113
NOTE: You can enable PXE support for only one NIC at a time.
•
•
•
•
Diskette Write Control sets the write controls for the diskette drive. By
default, this setting is Read and Write.
Diskette Boot Control enables the diskette drive to be used as a boot device.
By default, this setting is Enabled.
Advanced Memory Protection provides additional memory protection
beyond ECC. By default, the server is set to Advanced ECC Support.
PCI Devices Menu
The PCI Devices menu displays the configuration settings of the PCI devices
installed in the server and allows you to modify the IRQ. Multiple PCI devices
can share an interrupt.
To disable a device, select the device and press the Enter key. A menu is
displayed with options to change the IRQ, as well as to disable the device.
Standard Boot Order (IPL) Menu
The Standard Boot Order (IPL) option configures the Initial Program Load
(IPL) device, and controls the search order the server uses to look for a bootable
device.
Boot Controller Order Menu
The Boot Controller Order option selects which of the installed mass storage
devices is used as the primary boot controller.
Date and Time Menu
The Date and Time option sets the system time and date.
Automatic Server Recovery Menu
The ASR menu includes the following options:
ASR Status enables or disables ASR. By default, this setting is Enabled.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM