HP ProLiant DL380 G3 Server - Manual (Page 132)

132 HP ProLiant DL380 Generation 3 Server User Guide
− Memory test
− ROM information
− Copyright information
− Processor initialization
− Array controller initialization
− SCSI devices
− PXE initialization
The operating system loads to complete the boot process.
If the server completes POST and attempts to load the operating system, refer to
"Problems After Initial Boot (on page 137)."
Diagnostic Steps
If the server does not power up, or powers up but does not complete POST,
answer the questions in the following table to determine appropriate actions
based on the symptoms observed.
According to the answers you give, you are directed to the appropriate table. That
table outlines possible reasons for the problem, options available to assist in
diagnosis, possible solutions, and references to other sources of information.
HP CONFIDENTIAL
File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM