beautypg.com

HP ProLiant DL380 G3 Server User Manual

Page 86

background image

86

HP ProLiant DL380 Generation 3 Server User Guide

5. Connect the power cord to the power supply.

6. Route the power cord through the cable management arm or power cord

anchor.

NOTE: If using the power cord anchor, be sure to leave enough slack
in the power cord so that the redundant power supply can be removed
without disconnecting the power cord from the primary power supply.

7. Lock the cable management arm into the operating position.

8. Connect the power cord to the power source.

9. Be sure that the power supply LED is green ("Rear Panel LEDs and Buttons"

on page 15).

10. Be sure that the front panel external health LED is green ("Front Panel LEDs

and Buttons" on page 11).

HP CONFIDENTIAL

File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM

See also other documents in the category HP Computer hardware: