Removing the scsi terminator board – HP ProLiant DL380 G3 Server User Manual

Page 104

Text mode
Original mode

104

HP ProLiant DL380 Generation 3 Server User Guide

IMPORTANT: For this procedure, you do not need to remove the hot-
plug fans from the front fan bracket. When reinstalling the front fan
bracket, press the top of each fan to be sure it seats securely.

NOTE: For more information on preparing the server for installation or
removal procedures, refer to the Documentation CD.

5. Install the SCSI terminator board.

Removing the SCSI Terminator Board

1. Power down the server ("Powering Down the Server" on page 37).

2. Extend or remove the server from the rack ("Extending the Server from the

Rack" on page 38).

3. Remove the access panel ("Removing the Access Panel" on page 40).

4. Remove the front fan bracket.

HP CONFIDENTIAL

File Name: 303130-3.doc Last Saved On: 7/7/03 1:48 PM