HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 96)

HP Jetdirect troubleshooting
Reconfigure your printer.
Your wireless printer is not properly configured to communicate on your wireless
network. Exit this troubleshooting procedure and take the following steps:
1. Reset the print server to its factory default configuration. ( Click
here for instructions. )
2. Run the Wireless Setup Wizard and the Install Network Printer
Wizard. To start the Wireless Setup Wizard, insert the HP Jetdirect CD
into your computer. When the main screen comes up, select "Install"; then
select "Wireless"; then select "No, the wireless settings have not been
configured . . ."; then select "Step 1 -- Configure printer's wireless settings".
End of troubleshooting procedure.
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTNET09.HTM [5/20/2003 3:56:57 PM]