HP Jetdirect 280m 802.11b Wireless Print Server - Manual (Page 80)

HP Jetdirect troubleshooting
Is the printer ON and ONLINE?
The print server is not receiving power. First, make sure that the printer is
operating properly. Check these items:
●
Is the printer plugged in and switched on? Make sure that the printer
is plugged in and switched on. If your printer has a front panel display, it
should not be blank. If you have checked these items and the printer still
shows no sign of being on, you may have a defective power cable, power
source, or printer.
●
Is the printer online? The ONLINE or POWER light should be lit. If it is
not, press the appropriate key (such as ON LINE or GO) to place the printer
online. If your printer has a front panel display, check that is says "Online"
or "Ready".
●
Is the FORM FEED light on? If your printer has a FORM FEED light and
it is on, it may indicate that a print job is waiting to be printed. Take the
printer offline (if necessary), press the FORM FEED key, and then put the
printer back online. If a print job starts (or continues) to print, wait for it to
complete.
After looking through the list above and making any necessary
changes, is your printer on and online now?
file:///C|/Bottlecap_Structure_26--TestMerge/DOCS/EN/280M/USER/LWTPWR01.HTM [5/20/2003 3:54:07 PM]