HP Jetdirect 280m 802.11b Wireless Print Server User Manual

Page 152

ENWW

HP Jetdirect Configuration Page 11

SNMP Versions:

Specifies the SNMP versions enabled on the print server.

Disabled: All SNMP versions are disabled on the print
server. No SNMP access is allowed.

1;2: SNMP v.1 and SNMP v.2c are supported, and SNMP
v.3 is disabled, or not supported.

1;2;3-na/np: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
enabled with the minimum security of no authentication
(“na”) and no privacy (“np”).

1;2;3-a/np: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
enabled with the minimum security of authentication
enabled (“a”) but no privacy (“np”).

1;2;3-a/p: SNMP v.1, v.2c, and v.3 are enabled. v.3 is
enabled with the minimum security of authentication (“a”)
with privacy (“p”) enabled.

3-na/np: SNMP v.1 and v.2c are disabled. SNMP v.3 is
enabled with the minimum security of no authentication
(“na”) and no privacy (“np”).

3-a/np: SNMP v.1 and v.2c are disabled. SNMP v.3 is
enabled with the minimum security of authentication
enabled (“a”) but no privacy (“np”).

3-a/p: SNMP v.1 and v.2c are disabled. SNMP v.3 is
enabled with the minimum security of authentication (“a”)
with privacy (“p”) enabled.

SNMP Set Cmty Name:

Specifies whether an SNMP set community name has been
configured on the HP Jetdirect print server. An SNMP set
community name is a password for ‘write’ access to SNMP
control functions (SNMP SetRequests) on the HP Jetdirect
print server.

Not Specified: an SNMP set community name has not been
set.

Specified: a user-specified SNMP set community has been
set.

Access List:

Identifies whether a host access control list is configured on
the HP Jetdirect print server. A host access control
list specifies the IP address of individual systems, or IP
network of systems, that are allowed access to the print
server and device.

Specified: A host access list is configured on the
HP Jetdirect print server.

Not Specified: A host access list is not configured on the
print server. All systems are allowed access.

Table 9.4

Security Settings (2 of 2)

Message

Description