Print on both sides (duplexing), E print on both sides (duplexing) – HP Officejet Pro 251dw Printer series User Manual
Page 42
3.
Click the AirPort icon and select the HP wireless direct printing name, such as
HP-Setup-XX-Officejet Pro 251dw (where ** are the unique characters to
identify your printer).
If HP wireless direct is turned on with security, enter the password when
prompted.
4.
Add the printer.
a.
In System Preferences, select Print & Fax or Print & Scan, depending on
your operating system.
b.
Click + below the list of printers at the left.
c.
Select the printer from the list of detected printers (the word “Bonjour” is
listed the right column beside the printer name), and click Add.
5.
Print your document.
Print on both sides (duplexing)
You can print on both sides of a sheet of media automatically by using the automatic
two-sided printing accessory (duplexer).
NOTE: Two-sided printing requires an automatic two-sided printing accessory
(duplexer) to be installed on the printer.
To print on both sides (Windows)
1.
Load the appropriate media. For more information, see Guidelines for printing on
both sides of a page and Load paper.
2.
Make sure the duplexer is installed correctly. For more information, see Install the
automatic two-sided printing accessory (duplexer).
3.
With a document open, click Print on the File menu, and then select Print on
both sides options on the Finishing tab. Select Flip pages up if desired.
4.
Change any other settings, and then click OK.
5.
Print your document.
To print on both sides (Mac OS X)
1.
Load the appropriate media. For more information, see Guidelines for printing on
both sides of a page and Load paper.
2.
Make sure the duplexer is installed correctly. For more information, see Install the
automatic two-sided printing accessory (duplexer).
3.
Depending on your application use one of the following procedures to select a
paper size:
From Page Setup
a.
From the File menu in your software application, click Page Setup.
NOTE: If you do not see a Page Setup menu item, go to step 3.
b.
Make sure the printer you want to use is selected in the Format For pop-up
menu.
c.
Select the paper size from the Paper Size pop-up menu, and then click OK.
Chapter 2
38