HP XC System 2.x Software - Manual (Page 88)

queue contains the job starter script, but the unscripted queue does not have the job
starter script configured.
Example 7-1: Comparison of Queues and the Configuration of the Job Starter
Script
$ bqueues -l normal | grep JOB_STARTER
JOB_STARTER: /opt/hptc/lsf/bin/job_starter.sh
$ bqueues -l unscripted | grep JOB_STARTER
JOB_STARTER:
$ bsub -Is hostname
Job <66> is submitted to the default queue .
<>
<>
n10
$ bsub -Is -q unscripted hostname
Job <67> is submitted to the default queue .
<>
<>
n20
• Use the bjobs -l and bhist -l LSF commands to see the components of the actual
SLURM allocation command.
• Use the bkill command to kill jobs.
• Use the bjobs command to monitor job status in LSF.
• Use the bqueues command to list the configured job queues in LSF.
7.1.4 How LSF and SLURM Launch and Manage a Job
This section describes what happens in the HP XC system when a job is submitted to LSF.
Figure 7-1 illustrates this process. Use the numbered steps in the text and depicted in the
illustration as an aid to understanding the process.
Consider the HP XC system configuration shown in Figure 7-1, in which
lsfhost.localdomain is the LSF execution host, node n16 is the login node, and nodes
n[1-10] are compute nodes in the lsf partition. All nodes contain two processors, providing
20 processors for use by LSF jobs.
7-4 Using LSF