Prepare a color iron-on transfer, Change default copy settings, Stop copying – HP PSC 1610v All-in-One Printer User Manual
Page 60

You can be even more creative with your photos by using the HP Image Zone
software that came with your HP All-in-One. For more information, see the onscreen
HP Image Zone Help.
Prepare a color iron-on transfer
You can copy an image or text onto an iron-on transfer, then iron it onto a T-shirt,
pillow cover, place mat, or other piece of fabric.
Tip
Practice applying a T-shirt transfer on an old garment first.
1.
Load the iron-on transfer paper in the paper tray.
2.
Load your original face down on the right front corner of the glass.
If you are copying a photo, position the photo on the glass so the long edge of the
photo is along the front edge of the glass.
3.
Press
Copy Menu
until
Copy Paper Type
appears.
4.
Press until
Iron-On
or
Iron-On Mirrored
appears, and then press
OK
.
–
Select
Iron-On
as the paper type if you are using HP Iron-On Transfers for
color fabrics. If you are using HP Iron-On Transfers for color fabrics the
image does not need to be reversed to appear properly on the fabric.
–
Select
Iron-On Mirrored
if you are using HP Iron-On Transfers for light or
white fabrics. The HP All-in-One automatically copies a mirror image of your
original so that it will appear properly when you iron it onto light or white fabric.
5.
Press
Start Copy Black
or
Start Copy Color
.
Change default copy settings
1.
Make sure you have paper loaded in the paper tray.
2.
Load your original face down on the right front corner of the glass.
3.
Make any needed changes to the settings in the
Copy Menu
.
4.
Press
Copy Menu
until
Set New Defaults
appears.
5.
Press until
Yes
appears.
6.
Press
OK
to accept the settings as the new default settings.
7.
Press
Start Copy Black
or
Start Copy Color
.
The settings you specify here are only saved on the HP All-in-One. They do not adjust
the settings in the software. You can save your most frequently used settings by using
the HP Image Zone software that came with your HP All-in-One. For more
information, see the onscreen HP Image Zone Help.
Stop copying
➔ To stop copying, press
Cancel
on the control panel.
User Guide
57
Use
the
copy
features