HP PSC 1610v All-in-One Printer - Manual (Page 52)

Paper type Control panel setting
HP Premium Plus Photo Paper, Matte Premium Photo
HP Premium Plus 4 x 6 inch Photo Paper Premium Photo
HP Photo Paper Photo Paper
HP Everyday Photo Paper Everyday Photo
HP Everyday Photo Paper, Semi Gloss Everyday Matte
Other photo paper Other Photo
HP Iron-On Transfer (for color fabrics) Iron-On
HP Iron-On Transfer (for light or white fabrics) Iron-On Mirrored
HP Premium Paper Premium Inkjet
Other inkjet paper Premium Inkjet
HP Professional Brochure & Flyer Paper (Glossy) Brochure Glossy
HP Professional Brochure & Flyer Paper (Matte) Brochure Matte
HP Premium or Premium Plus Inkjet
Transparency Film Transparency
Other transparency film Transparency
Plain Hagaki (Japan only) Plain Paper
Glossy Hagaki (Japan only) Premium Photo
L (Japan only) Premium Photo
Increase copy speed or quality
The HP All-in-One provides three options that affect copy speed and quality.
●
Normal delivers high-quality output and is the recommended setting for most of
your copying. Normal copies faster than Best .
● Best produces the highest quality for all paper and eliminates the banding
(striping) effect that sometimes occurs in solid areas. Best copies more slowly
than the other quality settings.
● Fast copies faster than the Normal setting. The text is comparable to the quality
of the Normal setting, but the graphics might be lower quality. The Fast setting
uses less ink and extends the life of your print cartridges.
To change the copy quality from the control panel
1.
Make sure you have paper loaded in the paper tray.
2. Load your original face down on the right front corner of the glass.
3. Press Copy Menu until Copy Quality appears.
4. Press until the appropriate quality setting appears, and then press OK .
(continued)
User Guide 49
Use
the
copy
features