Copy a document that has been faxed several times, Enhance light areas of your copy, Enhance light – HP PSC 1610v All-in-One Printer User Manual
Page 58: Areas of your copy

Note
You can also press to make the image more pale.
7.
Press
Start Copy Black
or
Start Copy Color
.
Copy a document that has been faxed several times
You can use the
Enhancements
feature to adjust the quality of text documents by
sharpening edges of black text or adjust photographs by enhancing light colors that
might otherwise appear white.
The
Mixed
enhancement is the default option. Use the
Mixed
enhancement to
sharpen edges of most originals.
To copy a blurred document from the control panel
1.
Make sure you have paper loaded in the paper tray.
2.
Load your original face down on the right front corner of the glass.
3.
Press
Copy Menu
until
Enhancements
appears.
4.
Press until
Text
appears, and then press
OK
.
5.
Press
Start Copy Black
or
Start Copy Color
.
Tip
If any of the following occur, turn off
Text
enhancement by selecting
Photo
or
None
:
●
Stray dots of color surround some text on your copies
●
Large, black typefaces look splotchy (not smooth)
●
Thin, colored objects or lines contain black sections
●
Horizontal grainy or white bands appear in light- to medium-gray areas
Enhance light areas of your copy
You can use
Photo
enhancements to enhance light colors that might otherwise
appear white. You can also use
Photo
enhancements to eliminate or reduce any of
the following that might occur when copying with
Text
enhancements:
●
Stray dots of color surround some text on your copies
●
Large, black typefaces look splotchy (not smooth)
●
Thin, colored objects or lines contain black sections
●
Horizontal grainy or white bands appear in light- to medium-gray areas
To copy an overexposed photo from the control panel
1.
Make sure you have paper loaded in the paper tray.
Tip
For the best quality when copying a photo, load photo paper in the
paper tray.
2.
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
User Guide
55
Use
the
copy
features