HP StoreAll Storage - Manual (Page 74)

appropriate server. Select CIFS in the lower Navigator to display the CIFS panel, which shows
SMB activity statistics on the server. You can start, stop, or restart the SMB service by clicking the
appropriate button.
NOTE: Click CIFS Settings to configure SMB signing on this server. See “Configuring SMB signing
” (page 80) for more information.
To start, stop, or restart the SMB service from the CLI, use the following command:
ibrix_server –s –t cifs –c {start|stop|restart}
Monitoring SMB services
The ibrix_cifsmonitor command configures monitoring for the following SMB services:
•
lwreg
•
dcerpc
•
eventlog
•
lsass
•
lwio
•
netlogin
•
srvsvc
If the monitor finds that a service is not running, it attempts to restart the service. If the service
cannot be restarted, that particular service is not monitored.
The command can be used for the following tasks.
Start the SMB monitoring daemon and enable monitoring:
ibrix_cifsmonitor –m [–h HOSTLIST]
Display the health status of the SMB services:
ibrix_cifsmonitor –l
74 Using SMB