HP StoreAll Storage - Manual (Page 131)

If the remote cluster is running an earlier version of IBRIX software, you will be asked to enter the
clustername for the remote cluster. This name appears on the Cluster Configuration page on the
GUI for the remote cluster.
The Remote Replication Exports panel lists the replication exports you created for the file system.
Expand Remote Replication Exports in the lower Navigator and select the export to see the
configured server assignments for the export. You can modify or remove the server assignments
and the export itself.
CLI procedure
NOTE: This procedure does not apply to intracluster replication.
Use the following commands to configure the target file system for remote replication:
Configuring the target export for replication to a remote cluster 131