Firmware update – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 51

Firmware update
To achieve best performance, HP recommends running the latest firmware release.
Obtain the most current Fabric OS firmware, configuration files and MIB files that support
this switch from the following HP web site:
To download firmware from the web to another computer (like an FTP server):
NOTE:
Web retrieval procedures may be subject to change.
1.
Go to the Support section, located on the far right side of the web page. Click
Software & drivers.
2.
Locate the Tasks for Brocade 4Gb SAN Switch for HP c-Class BladeSystem section.
3.
Click Download drivers and software.
a. Select the applicable switch model.
b. Go to the Select Operating System section. Click Cross operating system (BIOS,
Firmware, Diagnostics, etc.)
c. Scroll down to the firmware section of the web page and locate the Firmware
table.
d. Locate the latest firmware.
e. Click Download button>> in the last column and follow the prompts in the
File Download dialog box.
4.
To download the code from an FTP server to the switch, connect an Ethernet cable
from the FTP server to the iLO RJ45 on the active OA.
5.
Telnet to the switch and issue firmwaredownload at the command line.
Brocade 4Gb SAN Switch for HP c-Class BladeSystem
51