Diagnostic tests, Installing an sfp, Sfp components – HP Brocade 4Gb SAN Switch for HP BladeSystem c-Class User Manual
Page 44: Figure 7 installing an sfp table 10 sfp components, Item description 1 bail 2 sfp, 44 managing the 4gb san switch, Scale: 3/8" = 1
To install a replacement SFP:
1.
Make sure that the bail is in the unlocked position.
2.
Orient the SFP with the appropriate port. See
and
.
scale: 3/8" = 1"
21
22
23
0
17
18
19
20
!
80
-10
007
4-01
Re
v.C
WH
0 40
000
211
MA
C 00 0
5 1E 35
A2 D6
WW
N 1
0:0
0:0
0:05
:1E
:35:A
2:D
6
Reset
b SAN Switc
h
25201a
1
2
BRO
CA
DE
Figure 7 Installing an SFP
Table 10 SFP components
Item
Description
1
bail
2
SFP
3.
Insert the SFP into the port until you hear a click.
4.
Close the bail.
Diagnostic tests
In addition to POST, Fabric OS 5.x includes diagnostic tests to help troubleshoot the
hardware and the firmware including tests of internal connections and circuitry, fixed
media, and the transceivers and cables in use.
Initiate diagnostic tests via the command line, using a telnet session or a terminal setup
with a serial connection to the switch. Some tests require the ports to be connected
by external cables to allow diagnostics to verify the serializer/deserializer interface,
transceiver, and cable. For information on available diagnostic tests, type diagHelp.
All diagnostic tests are run at link speeds of 1 Gb/sec, 2 Gb/sec, and 4 Gb/sec.
44
Managing the 4Gb SAN Switch