Pairsplit volume list, Window options, Copy pace list – HP XP Business Copy Software User Manual
Page 49: Select mu list, Select split type list, Select s-vol box
Business Copy XP user guide for the XP128/XP1024
49
•
Pairsplit Volume List
This list in the upper half of the Pairsplit pane displays the following information about the P-VOL and
S-VOL of the pair you want to split:
•
Port: Port ID (cluster and channel number) of the P-VOL
•
Group: Host group ID of the P-VOL
•
Path: CU:LDEV of the P-VOL
•
MU: MU number of the P-VOL
•
Status: Status of the P-VOL
•
Port: Port ID (cluster and channel number) of the first S-VOL of each volume pair
•
Group: Host group ID of the S-VOL
•
S-Vol Path: CU:LDEV of the S-VOL
•
Type: Emulation type of the P-VOL and S-VOL
•
Capacity(MB): Volume capacity displayed in megabytes (MB)
Window options
Copy Pace list
Use this list to select the copy pace (Slower, Medium, or Faster) for all pairs you are splitting. The Set
button applies the same copy pace to all pairs you are splitting.
Select MU list
Use this list to select the MU number for each pair being created: 0, 1, and 2 for L1 pairs, and 1 and 2 for
L2 pairs.
NOTE:
You can select an MU number for a cascade pair. You cannot select the same MU number for
different cascade pairs of the same P-VOL (root or node volume).
Select Split Type list
Use this list to select the pairsplit type: Quick Split or Steady Split.
Select S-Vol box
This box filters S-VOLs displayed in the S-VOL list. Use the Port list and Reserved check boxes to display
available S-VOLs by port and reserve attribute. Also use the Reserved box to select the pairs that can be
set as L2 pairs when the Pair check box is selected.
•
Use the Previous button to return to the previous page of the S-VOL List. This button is selectable only
when the number of volumes defined in the disk array exceeds 1,024, which is the maximum number
of volumes that can be displayed on one page. The button is unavailable if the total number of volumes
defined in the disk array is less than 1,024.
•
Use the Next button to turn to the next page of the S-VOL List. This button is selectable only when the
number of volumes defined in the disk array exceeds 1,024, which is the maximum number of volumes
that can be displayed on one page. The button is unavailable if the total number of volumes defined in
the disk array is less than 1,024.
•
The S-VOL List displays the following information related to S-VOLs:
• Port: Port ID (cluster and channel number) of the S-VOL
• Group: Host group ID of the S-VOL
• S-Vol Path: CU:LDEV of the S-VOL
• Pair Num: Number of pairs
• Type: Emulation type of the S-VOL
• Capacity(MB): Capacity of the S-VOL in megabytes (MB)
• CLPR: The cache logical partition (CLPR) of the S-VOL