Volume list, Figure 15 volume list, 15 volume list – HP XP Business Copy Software User Manual
Page 38
38
Business Copy XP (BC) for the XP128/XP1024
NOTE:
The value (Y) does not include Auto LUN XP pairs. If Auto LUN XP pairs exist, the BC
paircreate operation may fail, even when (Y) is less than 4,095.
•
Use the Display Filter button to filter volumes displayed in the Volume list.
•
The Apply button performs BC operations displayed in the Preset Volume list in the disk array. If the
specified operations complete successfully, the Preset Volume list is cleared. If an error occurs during an
operation, the failed operation remains in the Preset Volume list. To display the error code and
message for the failed operation, select the Detail command.
•
The Cancel button cancels all operations specified on the Display tab.
To perform BC operations for volumes, select one or more volumes in the Volume list, right-click, and select
the command (see ”
For information about the History and Option tabs of the BC main screen, see ”
Volume list
The Volume list (
) displays volume/pair information based on filter options selected in the Tree
View box (along the left side of the screen).
NOTE:
You can select up to 512 volumes/pairs in the Volume list.
Figure 15
Volume list
The Volume list contains all installed volumes (LUs) on the selected port and displays the following
information for each volume:
•
Port: Port ID (cluster and channel number) of each volume. If L2 pairs exist, a different icon displays. To
display detailed information on L2 pairs, double-click the corresponding S-VOL in the Volume list.
•
Group: Host group of each volume.
•
Path: CU:LDEV (control unit image:logical device ID) of each volume.
•
MU: MU number of a BC cascade pair formed with the volume.
•
Status: BC pair status of the volume pair: SMPL, COPY(PD), PAIR, PSUS, COPY(RS), PSUE, COPY(SP),
COPY(RS-R), PSUS(SP), SMPL (PD), Secondary, and Leaf.
•
Port: Port ID (cluster and channel number) of the first S-VOL of each volume. If there is no S-VOL, --- is
displayed.
•
Group: Host group of the S-VOL. If there is no S-VOL, --- is displayed.
•
S-Vol Path: CU:LDEV (control unit image:logical device ID) of the S-VOL. If there is no S-VOL, --- is
displayed.
•
CTG: Consistency group number of the S-VOL. If no consistency group is set for the S-VOL, --- is
displayed.
•
SvolMode: Status of the S-VOL.
• S-VOL Write: When the S-VOL status is COPY(SP), PSUS(SP), or PSUS and the host writes to the
S-VOL, W is displayed.
• Hide Mode: When the S-VOL is set to hide mode, N is displayed.
•
CopyPace: Copy pace (Slower, Medium, or Faster) for the pair being created.