HP XP Business Copy Software - Manual (Page 37)

Business Copy XP user guide for the XP128/XP1024 37
The following icons appear in the tree:
NOTE: You can filter volumes or volume pairs displayed in the Volume list on the upper-right side
of the Display tab by selecting a port, host group, or volume (P-VOL). To display all volumes and
pairs, select Port at the top of the Tree View box.
• The Volume list on the upper-right of the Display pane shows all available volumes on the port, host
group, or P-VOL selected in the Tree View box. You can sort volumes by port, group, path, MU#, status,
port (S-VOL), group (S-VOL), S-VOL path, copy pace, copy progress, volume emulation type, and
capacity. You can also filter volumes by reserve attribute, pair condition, and pair status in the Display
Filter window. To open the Display Filter window, click Display Filter, or select the Display Filter
command from the shortcut menu.
• The following icons indicate the status of a volume or pair:
• The Preset Volume list, below the Volume list, displays the content of the operations (volume/pair
information) that have been set or specified, but are not yet applied to the disk array.
• The Volume/Pair Settings box on the lower-right side displays:
• Preset: Number of operations (volume/pair information) that have not been performed in the disk
array. The Preset Volume list, located below the Volume list, displays preset operations. Click Apply
to perform the specified operations displayed in the Preset Volume list.
• Volume: Total number of volumes defined in the disk array.
• Reserve: X(Y)/Z, where:
X = total number of BC reserved volumes
Y = total number of BC reserved volumes
Z = maximum number of reserved volumes
• Pair: X(Y)/Z, where:
X = total number of BC pairs
Y = total number of BC pairs
Z = maximum number of pairs (BC/Auto LUN XP)
Table 13 BC tree icons
Icon Meaning
Port
Host group
LUN
Root
Table 14 Status icons for BC
Icon LDEV status
L1 pair
L2 pair
S-VOL (node volume: Secondary , Leaf volume: Leaf )
Reserved volume
An error occurred during operations. This error icon is displayed in the Preset Volume list.