Critical event messages – HP Integrity NonStop H-Series User Manual
Page 266
Error Messages
HP AutoSYNC User’s Guide—522580-021
D-8
Critical Event Messages
201
Cause. An ASYSYNC process logged an error to a SYNC user logfile.
Effect. An ASYSYNC process has failed and a synchronization may not be performed.
Recovery. Check the log of the SYNC user for further information.
204
Cause. An ASYSYNC process has initialized or updated its file sets.
Effect. The ASYSYNC process performs an updated set of synchronizations.
Recovery. Informational message only; no corrective action is needed.
226
Cause. A local or remote ASYSYNC process detected an illegal request. The
message code received is not legal. The message code is displayed in the message.
Effect. The synchronization fails and the process stops.
Recovery. Informational message only; no corrective action is needed..The
synchronization will be automatically restarted.
Critical Event Messages
400
Cause. Monitor initialization failed. The cause of the failure is displayed in the
message.
Effect. The monitor stops.
Recovery. Correct the cause of the failure and restart the monitor.
ASYSYNC logged error
Fileset update
Illegal request received.
Monitor initialization failed