HP Integrity NonStop H-Series - Manual (Page 228)

Operations and Management
HP AutoSYNC User’s Guide—522580-021
A-6
BACKUPCPU
BACKUPCPU
The BACKUPCPU command is identical to the TACL command with the same name.
cpu
the CPU number where the monitor backup process should be started. If omitted,
the backup process is terminated.
LOG
The LOG command starts (and stops) the logging of monitor activity.
TO file [CLEAR]
the name of a log file. CLEAR empties the file before logging commences.
If file already exists, information is appended to the end of the file unless CLEAR is
specified. If the file name ends with a number (for example, LOG001), additional
files will be allocated with incrementing numbers when the first file becomes full.
STOP
stops logging.
Activities that are logged include:
1. Starting and stopping the log.
2. Any errors obtaining information from the MapDB.
3. NonStop process events, such as a backup process takeover.
4. Local CPU failures and reloads.
5. Network status changes
STATUS
The STATUS command displays information about various objects.
PROCESS
BACKUPCPU [ cpu ]
LOG { TO file [CLEAR] | STOP }
Note. Information in the activity log is for informational and diagnostic purposes. It is not
intended to be an official or reliable record for continuing management or control purposes.
The content and format of the log is subject to change without notification.
STATUS [ PROCESS | LOG | LICENSE | TCPIP ]