HP Integrity NonStop H-Series - Manual (Page 264)

Error Messages
HP AutoSYNC User’s Guide—522580-021
D-6
Informational Messages
Effect. The file is not synchronized and the error is reported in the log. The remaining
files in the fset-ID are synchronized.
Recovery. An EMS message displays the name of the logfile SLggguuu, the key of
the log record, the SYNCfileset ID, the file error and the filename portion of the file. The
user should then refer to the log file for details.
123
Cause. An ASYSYNC process performed the TRIGGER option; it started a TACL
process or an OSS shell passing the trigger command. TACL or the OSS shell
abended.
The message contains the user ID, destination node name, BATCHID, the file-set ID,
and the error text or error and error detail code.
Effect. Effect. The file for which the trigger was executed is deleted and the old
destination file if it existed is restored into the destination location. The remaining files
in the file set are synchronized.
Recovery. An EMS message displays the name of the log file SLggguuu, the key of
the log record, the SYNCfileset ID, the file error, and the filename portion of the file.
The user should then refer to the logfile for details and correct the cause of the failure.
124
Cause. The USER_AUTHENTICATE_ procedure failed to change the destination
ASYSYNC (or ASYSYNCP if synchronizing over TCP/IP) process state from a remote
to a local process.
Effect. The destination ASYSYNC process will abend.
Recovery. Set up the destination ASYSYNC object to allow local logon, which
requires licensing the process.
125
Cause. One or multiple files could not been replaced during this synchronization.
Effect. One or more files were not synchronized; there may or may not be an error
associated with this; there might be no files that required synchronization. Any error is
reported in the log file SLggguuu. The remaining files in the fset-ID are synchronized.
Trigger TACL or OSS shell process abended
Local Logon Denied
One or multiple files not synchronized.