HP Integrity NonStop H-Series - Manual (Page 174)

Command Interpreter
HP AutoSYNC User’s Guide—522580-021
8-80
INFO TCPIP
info-option:
DETAIL
displays detailed information about the SYNCUSER configuration.
OBEYFORM
displays the text of the ADD SYNCU[SER] command that was used to
configure the SYNCUSER. This option overrides the DETAIL option.
INFO TCPIP
Displays the following TCP/IP configuration settings:

the current TCP/IP defines,

the name of the private SERVICES file, if one is present in the AutoSYNC product
subvolume,

the port number for the transport service (ASYNSYNC-ZASY),

the port number for the logging service (ASYNLOG-ZASY), if one is configured,

For each TCP/IP process on the current system, the following information in
format:
TCP/IP process $Znnn,
Hostid (if any) for the TCP/IP process $Znnn
Hostname (gethostname): hostname-from-gethostname
IPv4 address(getaddrinfo): xx.xxx.xx.xx
IPv6 address(getaddrinfo): ::ffff:xx.xxx.xx.xx
getipnodebyname( IPV4 ) returns:
Hostname = hostname-from-getipnodebynameI
IPv4 address: xx.xxx.xx.xx
getipnodebyname( IPV6 ) returns:
Hostname = hostname-from-getipnodebyname
IPv6 address: ::ffff:xx.xxx.xx.xx
INFO TCPIP does not display any information about the AutoSYNC TCP/IP status. It is
supplied for convenience. If the information displayed is incorrect or unexpected,
consult your network administrator.
INFO TCPIP [ tcpip-address | host-name ]