D error messages, Informational messages, D. error messages – HP Integrity NonStop H-Series User Manual
Page 259: Appendix d, error messages, Was updated to add the de, Error messages
HP AutoSYNC User’s Guide—522580-021
D-1
D
Error Messages
This appendix describes the EMS messages generated by AutoSYNC. In each
message description, the following information appears:
Message number
Message text
Cause—the condition or error that produced the message
Effect—the effect of the condition or error on the system
Recovery—the steps required to recover from a reported error
The event descriptions are organized as follows:
Informational Messages
100
Cause. The monitor process is initializing itself.
Effect. The monitor process is not ready to service requests until initialization is
completed.
Recovery. Informational message only; no corrective action is needed.
101
Cause. The monitor process has completed initialization.
Effect. The monitor is ready to service requests.
Recovery. Informational message only; no corrective action is needed.
102
Cause. The monitor process is stopping due to a user request. The EMS message
identifies the user that made the request.
Monitor initialization
Monitor started
Monitor stopped