HP Integrity NonStop H-Series - Manual (Page 261)

Error Messages
HP AutoSYNC User’s Guide—522580-021
D-3
Informational Messages
107
Cause. The monitor process has displayed status information.
Effect. Status information is placed in the EMS log.
Recovery. Informational message only; no corrective action is needed.
108
Cause. The monitor process has started an ASYSYNC process to perform AutoSYNC
synchronization.
The message contains the userID, the destination node, the batchID and the process
name.
Effect. AutoSYNC processing for the specified user ID is active.
Recovery. Informational message only; no corrective action is needed.
109
Cause. An ASYSYNC process has stopped.
The message contains the userID, the destination node, the batchID and the process
name.
Effect. AutoSYNC processing for the specified user id is not active.
Recovery. This usually occurs when a user has deleted a SYNCFileset. No action is
required.
110
Cause. An ASYSYNC process abended
The message contains the userID, the destination node, the batchID and the error
information.
Effect. A configured synchronization is not being performed.
Monitor status info
Monitor started ASYSYNC process
ASYSYNC process stopped
ASYSYNC process abended