Planning location, Figure 2-2, Power and signal cable routing – HP NonStop G-Series User Manual
Page 19
Unpacking the Tape Library
L700 (CTL700) Installation and User’s Guide — 527338-008
2 -3
Planning Location
Planning Location
•
Allow enough space for the tape library. Plan the signal cable and power cable
routing. Provide enough space to open all the doors.
•
Provide 15 centimeters (6 inches) above the tape library and 10 centimeters (4
inches) on the sides for cooling clearance.
•
See
for the space needed for the tape library.
•
See
for the locations for power and signal cable routing.
Follow the site guidelines detailed in the L700 Tape Library Installation Manual.
Figure 2-2. Power and Signal Cable Routing
Note. To ensure reliable operation, place the tape library in an environment that is free of dust
and excessive humidity.
This manual is related to the following products: