HP ProLiant ML350 G4 Server - Manual (Page 79)

79
Server Cabling
In This Section
Cabling Guidelines ....................................................................................................................... 79
SCSI Hot-Plug Cabling ................................................................................................................ 79
Connecting ATA or ATAPI Devices to the Integrated IDE Controller........................................ 92
Cabling Guidelines
This chapter provides an overview of the internal cabling of the HP ProLiant
ML350 Generation 4 Performance (G4p) server chassis. It also includes
information on how to cable SCSI, SATA, SAS, IDE, and removable media
devices in the system, as well as information about all critical system cabling. If
external cabling is required, refer to the documentation included with the external
storage device.
SCSI Hot-Plug Cabling
Storage Device Installation (on page 79 )
Identifying SCSI Components (on page 80 )
Installing an Internal-to-External SCSI Controller ("Connecting ATA or ATAPI
Devices to the Integrated IDE Controller" on page
92 )
Cabling SmartArray or other RAID Controller ("Installing an Internal-to-
External SCSI Connector" on page
87 )
Cabling SCSI Devices in the Removable Media Area (on page 89 )
Storage Device Installation Guidelines
Consider the following guidelines when adding SCSI devices: