beautypg.com

HP ProLiant ML350 G4 Server User Manual

Page 75

background image

Hardware Options Installation

75

a. Use the T-10 Torx screwdriver to remove the two front panel screws.

Slide tower configuration panel back and then away from the chassis.

7. Align the pins on the server bezel with the corresponding slots on the chassis

and push down. Secure the server bezel to the chassis by tightening the
thumbscrews.

8. Replace the access panel ("Removing Access Panel" on page

27

).

This manual is related to the following products:
See also other documents in the category HP Computer hardware: