HP ProLiant ML350 G4 Server - Manual (Page 73)

Hardware Options Installation 73
Tower-to-Rack Conversion Option
Converting a Tower Server to a Rack Server (on page 73 )
Installing the Rack Server (on page 76 )
Accessing the Server in the Rack (on page 76 )
Converting a Tower Server to a Rack Server
The tower-to-rack conversion kit includes all equipment required to convert the
tower model server into a rack model server, and to install the server into most
square- or round-hole racks.
The tower-to-rack conversion kit includes:
•
•
•
•
•
•
•
•
•
Rack rails
Cable management arm
Server rails
Cage nuts
Rack template
Server bezel for rack environment
In addition to the supplied items, you may need:
T-10 Torx screwdriver
T-15 Torx screwdriver
Pencil
To convert a tower server to a rack server:
1. Power down the server ("Powering Down the Server" on page 25 ).
2. Remove the front bezel door, if necessary ("Removing the Front Bezel
(Tower Model)" on page 27 ).