HP ProLiant ML350 G4 Server - Manual (Page 35)

Server Setup 35
The leveling jacks are extended to the floor. •
•
•
•
•
The full weight of the rack rests on the leveling jacks.
The stabilizing feet are attached to the rack if it is a single-rack
installation.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become
unstable if more than one component is extended for any
reason.
WARNING: To reduce the risk of personal injury or
equipment damage when unloading a rack:
At least two people are needed to safely unload the rack from
the pallet. An empty 42U rack can weigh as much as 115 kg
(253 lb), can stand more than 2.1 m (7 ft) tall, and may become
unstable when being moved on its casters. •
•
•
•
•
•
•
•
Never stand in front of the rack when it is rolling down the ramp
from the pallet. Always handle the rack from both sides.
Identifying Tower Server Carton Contents
Unpack the server shipping carton and locate the materials and documentation
necessary for installing the server.
The contents of the server shipping carton include:
Server
Power cord
Keyboard (not included in all regions)
Mouse (not included in all regions)
Hardware documentation, Documentation CD, and software products
In addition to the supplied items, you may need:
T-15 Torx screwdriver