HP Integrity Essentials Pack for Linux Software - Manual (Page 13)

1 Planning the Installation
Installing the Linux operating system (OS) on an HP Integrity server involves preparing the
hardware for the OS installation, installing the OS, and updating the system with the latest OS
patches. This chapter helps you plan the installation based on the server model, the OS edition,
the source of the OS media, and your network environment. Subsequent chapters guide you
through the installation process.
Overview
The HP Integrity server family, based on the Intel Itanium processor, supports Linux on a full
range of server models. This range includes entry-level servers, such as the 2-processor rx1620;
mid-range servers, such as the rx7640 and rx8640; and the high-end 64-processor Superdome.
Some servers, such as the HP Superdome, rx8640, and rx7640 servers, are based on the HP
Super-Scalable Processor chipset (sx1000 or sx2000). They are composed of basic building blocks
known as cells. These cell-based servers can be set up as a single system or divided into multiple
partitions, where each partition is assigned memory, processors, and I/O resources for its exclusive
use. Each partition can execute its own OS image.
Support Information
To prepare for the installation of the HP Insight Foundation Suite for Integrity with Linux, verify
that the server satisfies the software and hardware requirements described in this section.
Supported Linux OS Distributions
The Linux OS distributions supported by the HP Insight Foundation Suite for Integrity with
Linux are as follows:
• Red Hat Enterprise Linux (RHEL)
— RHEL4U4 and later updates
— RHEL5 and later updates
• SUSE Linux Enterprise Server (SLES)
— SLES10 and later service packs
— SLES11 and later service packs
Supported Hardware
HP provides support for Linux on HP Integrity servers using only the latest HP Support Pack
version that is provided with the HP Insight Foundation Suite for Integrity with Linux. This is
the latest HP Support Pack for a given Linux distributor without exception. HP supports the
minimum OS distributions as listed in
Table 1-1 including later updates and service packs unless
otherwise specified in “Support Exceptions” (page 14) . Each HP Support Pack version contains
only the currently supported OS distributions and includes any problem resolutions that have
been implemented to improve the product.
HP recommends that you frequently update your copy of the HP Insight Foundation Suite for
Integrity with Linux to ensure that your servers are being managed with the most current support
tools and that you have the supported version of HP Support Pack. You can obtain the latest
version of the product as described in
“Obtaining the Latest HP Insight Foundation Suite for
Integrity with Linux” (page 19) .
HP recommends that you review Appendix D (page 61) to ensure that the adapters in your
server are supported by the HP Insight Foundation Suite for Integrity with Linux. In addition,
HP recommends that you keep the server up-to-date as described in
“Updating the Server”
(page 33) .
Overview 13