HP Insight Diagnostics Software - Manual (Page 22)

Figure 3-6 Test tab – Complete Test
The Status tab displays test progress. The logs, on the Log tab, display detailed test results.
Using the Status tab
The Status tab displays testing progress and results
Viewing Diagnose test status
The progress and status of the Diagnose process appears on the Status tab when Diagnose
completes
The progress bar shows the test progress. During tests of longer duration, the Status screen
refresh rate varies.
To cancel the test in progress, click Cancel.
To repeat the test, click Retest.
The Device Diagnosis sections display device-specific details and test results and details for each
device.
Test results are indicated as follows:
• Canceled : The test did not complete or was canceled.
• Passed : The test passed and the device is operating within specifications.
• Failed : The device failed the test, or the test itself failed. A failure indicates that additional
testing should be performed on the device.
• Further Troubleshooting Required : A communication problem exists that could be related
to the health of the device. Perform additional troubleshooting procedures to determine the
problem or use the Custom Test option on the Test tab to retest the device. Custom testing
can be performed only with HP Insight Diagnostics Offline Edition.
• Abnormal termination : The test terminated abnormally.
Click Identify Drive to identify the specific hard drive in the computer that may contain the
volume. The hard drive LED indicates the location of the volume as follows:
• A SCSI hard drive containing the logical volume flashes the hard drive LED.
• A SATA or SAS hard drive containing the logical volume illuminates a blue hard drive LED.
22 Using HP Insight Diagnostics