HP Insight Diagnostics Software - Manual (Page 24)

Figure 3-8 Custom test results
The Log tab
The Log tab includes four logs containing historical testing and diagnosis information:
• Diagnosis Log displays the following details on the tested devices after Diagnose completes.
— The pass/fail status
— The list of devices diagnosed
— The number of times Diagnose ran
— The number of times the test failed
— The number of times the test passed
— The time it took to run Diagnose on each device during the last execution
• Test Log (available only in HP Insight Diagnostics Offline Edition) displays detailed offline
test details.
• Error Log displays the tests that have failed during the diagnostic testing.
• Integrated Management Log displays POST errors and diagnostic errors. The IML records
system events, critical errors, power-on messages, memory errors, and any catastrophic
hardware or software errors that typically cause a system to fail. The IML enables the
manipulation of this data.
Diagnosis Log tab
Detailed results of Diagnose appear in the Diagnosis Log on the Log tab.
The Diagnosis Log displays the following information:
• The status indicator for each power supply or logical volume diagnosed
• The specific power supply or logical volume diagnosed
• The number of times the diagnostic test was run
• The number of times the diagnostic test failed
• The time required to complete the diagnostic test
To clear the contents of the Diagnose Log, click Clear Diagnosis Log.
24 Using HP Insight Diagnostics