Running a quick test, Diagnose tab – HP Insight Diagnostics Software User Manual
Page 19
Figure 3-3 Diagnose tab
If the computer does not have any logical volumes or power supplies that are diagnosable, the
following message appears:
System does not have any diagnosable devices installed.
Using the Test tab (HP Insight Diagnostics Offline Edition only)
IMPORTANT:
This feature is available only in HP Insight Diagnostics Offline Edition.
The offline HP Insight Diagnostics Test feature provides options for diagnostic testing of all
major hardware components in the system. Three tests are available on the Test tab:
•
Quick Test
runs a predetermined test script for which a sample of each hardware component
is exercised and requires no user intervention.
•
Complete Test
runs a predetermined script for which each hardware component is tested
fully.
•
Custom Test
runs only the tests selected. This test is the most flexible option, with selections
for specifying devices, tests, and test parameters.
Running a Quick Test
1.
Click Quick Test.
2.
Select the test mode:
•
Interactive
runs all tests, some of which require user input.
•
Unattended
runs the tests that do not require user input.
3.
Select the test duration:
•
Loops
runs the test for the specified number of test cycles.
•
Total Test Time (minutes)
runs the test for the specified length of time.
4.
Select Stop on First Error to stop all tests if an error occurs.
Using the Test tab (HP Insight Diagnostics Offline Edition only)
19