X values, Enww interpret control-panel messages 187 – HP Color LaserJet Enterprise CP4525 Printer series User Manual
Page 201
![background image](/manuals/397564/201/background.png)
Description
Recommended action
56.X ERROR
To continue turn off then on
A temporary printing error has occurred.
Turn the product off, and then turn the
product on.
If the message persists, contact HP support.
See
.
57.XX ERROR
To continue turn off then on
A temporary printing error has occurred.
Turn the product off, and then turn the
product on.
If the message persists, contact HP support.
See
.
58.XX ERROR
To continue turn off then on
A temporary printing error has occurred.
Turn the product off, and then turn the
product on.
If the message persists, contact HP support.
See
.
59.BO CLEANING MOTOR ERROR
REPLACE TONER COLLECTION UNIT
This message appears for one of the
following reasons:
●
The cleaning motor is stuck.
●
The toner collection unit is full.
●
The chute at the top of the toner
collection unit is clogged.
Replace the toner collection unit. See
Replace the toner collection unit
on page 167
.
59.XY ERROR
To continue turn off then on
A temporary printing error has occurred.
Turn the product off, and then turn the
product on.
If the message persists, contact HP support.
See
.
60.X ERROR
To continue turn off then on
The tray specified by X is not lifting correctly.
X values
●
2 = Tray 2
●
3 = Tray 3
Follow the instructions on the product control
panel.
62 NO SYSTEM
To continue turn off then on
The product has an internal problem.
Turn the product off and then on.
If the message persists, contact HP support.
See
.
66.XY.ZZ SERVICE ERROR
Check cables and turn off then on
The external paper-handling controller has
detected a failure.
Turn the product off and then on.
If the message persists, contact HP support.
See
.
68.X PERMANENT STORAGE FULL
To continue press OK
The product NVRAM is full. Some settings
saved in the NVRAM might have been reset
to the factory defaults. Printing can continue,
but some unexpected functions might occur
if an error occurred in permanent storage.
X values
●
0 = Internal memory
●
1 = Removable disk
Press the
OK
button to clear the message. If
the message is not cleared, turn the product
off, and then turn the product on.
If the message persists, contact HP support.
See
.
Table 10-1
Control-panel messages (continued)
ENWW
Interpret control-panel messages 187