HP Color LaserJet Enterprise CP4525 Printer series - Manual (Page 173)

Economy settings
Optimize speed or energy usage
The optimum speed or energy usage feature controls the fuser cool down behavior. The following
settings are available:
FASTER FIRST PAGE The fuser maintains power and the first page processes faster
for any new job that is sent to the product.
SAVE ENERGY The fuser reduces power when it is idle.
SAVE MORE ENERGY The fuser reduces power when it is idle. The fuser reduces
more power than the SAVE ENERGY setting.
SAVE MOST ENERGY The fuser is turned-off and it gradually cools to room
temperature. The SAVE MOST ENERGYsetting takes the
longest time to print the first page.
Complete the following steps to optimize the product for speed or energy usage:
1. Press the Home button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK
button to select it.
a. CONFIGURE DEVICE
b. SYSTEM SETUP
c. OPTIMUM SPEED/ENERGY USAGE
3. Select the appropriate option.
Powersave modes
The adjustable sleep mode feature reduces power consumption when the product has been inactive for
an extended period. You can set the length of time before the product enters sleep mode.
NOTE: This mode does not affect product warm-up time.
Disable or enable sleep mode
1. Press the Home button .
2. Open each of the following menus. Press the down arrow to highlight it and then press the OK
button to select it.
a. CONFIGURE DEVICE
b. RESETS
c. SLEEP MODE
ENWW Economy settings 159