HP XP7 Storage - Manual (Page 85)

Among the displayed items, HDLM Manager indicate the HDLM component
information.
Starting and Stopping the HDLM Manager
If an error occurs in the system, such as in an HDLM program, you might
need to manually stop or start HDLM to recover from the error.
Starting the HDLM Manager
During installation of the remote management client, the HDLM manager is
registered as a Windows service and the startup type is set to Automatic.
This means that when Windows starts, the HDLM manager will also start
automatically.
If, for some reason, the HDLM manager does not automatically start, do the
following:
Log on to Windows on the remote management client as a member of the
Administrators group. From Control Panel, choose Administrative Tools,
and then Services. From the list of services, double-click DLMManagerVM,
and then click the Start button.
Use the following dlnkmgr command's view operation from the remote
management client to confirm that the HDLM manager has started.
PROMPT>dlnkmgr -l view -sys -msrv
HDLM Manager Ver WakeupTime
Alive x.x.x-xx yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
When the HDLM Manager column shows Alive, the HDLM manager is active.
Stopping the HDLM Manager
When you remove, upgrade, or re-install HDLM, the HDLM manager will
automatically stop.
If, for some reason, the HDLM manager does not automatically stop, stop it
as follows:
Log on to Windows on the remote management client as a member of the
Administrators group. In Control Panel, choose Administrative Tools, and
then Services. From the list of services, double-click DLMManagerVM, and
then click the Stop button.
Use the following dlnkmgr command's view operation from the remote
management client to confirm that the HDLM manager has stopped.
PROMPT>dlnkmgr -l view -sys -msrv
HDLM Manager Ver WakeupTime
HDLM Operation
4-9
Hitachi Dynamic Link Manager (for VMware®) User Guide