HP XP7 Storage - Manual (Page 63)

password=password storage nmp satp rule add -V HP -M "^OPEN-
*" -s HTI_SATP_HDLM
7
.
Check the path configuration according to the procedure described in
Checking the Path Configuration on page 3-15 .
8
.
If you are managing HDLM by using Global Link Manager, set up the host
and remote management client by following the procedure described in
Settings When Managing HDLM by Using Global Link Manager on page
3-11 .
Performing an Upgrade Installation of HDLM
The procedure for an upgrade installation of HDLM is the same as for a new
installation.From the following, use the procedure that matches the
installation destination:
You can use VMware vSphere Update Manager.
• Remote management client
For details, see
New installation on remote management client on page
3-7 in Performing a New Installation of HDLM on page 3-6 .
However, the operations in step 2 and step 5 are not necessary.
• Host
For details, see
New installation on host on page 3-9 in Performing a New
Installation of HDLM on page 3-6 .
By using an HDLM offline bundle file as a VMware vSphere Update
Manager patch, you can upgrade HDLM.
Apply the offline bundle file to the host as a patch by using VMware
vSphere Update Manager, and then perform steps 5 to the end of the
procedure described in New installation on host on page 3-9 of Performing
a New Installation of HDLM on page 3-6 .
Performing a Re-installation of HDLM
Before you can re-install HDLM, you must remove the existing installation.
To re-install HDLM:
1
.
Prepare for HDLM removal by following the directions in Preparations for
HDLM Removal on page 3-22 .
2
.
Remove HDLM from the host and remote management client by following
the directions in Removing HDLM on page 3-23 .
3
.
Install HDLM on the remote management client and the host by following
the directions in Performing a New Installation of HDLM on page 3-6 .
Settings When Managing HDLM by Using Global Link Manager
When managing HDLM by using Global Link Manager, the following setup
tasks need to be performed for the host and remote management client:
Creating an HDLM Environment
3-11
Hitachi Dynamic Link Manager (for VMware®) User Guide