HP XP7 Storage - Manual (Page 199)

Message ID Message Text Explanation
The path might be damaged. For
details on what to do, see What
To Do for a Path Error on page
5-2 , and then switch the path
shown in the message to Online.
KAPL08026-E An error occurred on all the
paths of the LU. PathID =
aa...aa
Details
An error occurred in the last,
remaining path of an LU. (This is
most likely as a result of a
disconnection.)
aa...aa: Path ID (same as PathID
of view -path) (decimal number)
Action
Errors are detected in all the
paths connected to the LUs. See
What To Do for a Path Error on
page 5-2 to make the path shown
in the error message or the paths
connected to the target LU.
KAPL08027-E A path was excluded from the
items subject to automatic
failback. PathID = aa...aa
Details
A path was excluded from being
subject to automatic failbacks
because the system judged that
an intermittent error was
occurring in that path.
aa...aa: Path ID (same as PathID
of view -path) (decimal number)
Action
An intermittent error has
occurred. Check the path for any
possible problems. For details on
what to do, see What To Do for a
Path Error on page 5-2 , and
switch the path shown in the
message to Online.
KAPL08032-I A path was recovered. (PathID
= aa...aa)
Details
The path has changed to an online
status.
aa...aa: Path ID (same as PathID
of view -path) (decimal number)
Action
None
Messages
8-35
Hitachi Dynamic Link Manager (for VMware®) User Guide