HP XP7 Storage - Manual (Page 171)

Message ID Message Text Explanation
Execute help operation of the
HDLM command (dlnkmgr) to
check which parameters can be
specified at the same time, and
then retry. For details on the help
operation, see help (Displays the
Operation Format) on page 6-5 .
KAPL01036-E The Offline path cannot be
placed online. PathID = aa...aa
Details
The path could not be recovered.
aa...aa: Path ID (decimal
(base-10) number)
Action
Remove the error in the path, and
then retry.
KAPL01039-W During the online operation
processing of the HDLM
command, a path that cannot be
placed in the Online status was
detected. PathID = aa...aa
Would you like to continue the
processing of the online
operation? [y/n]:
Details
A path that cannot be placed
Online was detected during
multi-path online processing. To
ignore this path and perform
online processing for the next
path, enter y. To cancel
processing, enter n.
aa...aa: Path ID (decimal
(base-10) number)
Action
If you want to continue processing
of the online operation of the
HDLM command for other paths,
enter y. If you want to terminate
processing, enter n. For details on
the online operation, see online
(Places Paths Online) on page
6-11 .
KAPL01040-W The entered value is invalid. Re-
enter [y/n]:
Details
A value other than y and n was
entered. Enter y or n.
Action
Enter y or n.
KAPL01041-E The entered value is invalid. The
operation stops. Operation name
= aa...aa
Details
Command processing will be
aborted because an incorrect
value was entered three times in
a row for a request.
aa...aa: clear, offline, online,
or set
Action
Check the correct value, and then
re-execute the HDLM command.
Messages
8-7
Hitachi Dynamic Link Manager (for VMware®) User Guide