HP XP7 Storage - Manual (Page 82)

PROMPT>
To display the operating environment of the audit log, execute the HDLM
command's view operation with the -sys and -audlog parameters specified.
The following example shows how to execute the command:
PROMPT>dlnkmgr -l view -sys -audlog
Audit Log : off
Audit Log Category : -
KAPL01001-I The HDLM command completed normally. Operation name =
view, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
For details on the displayed items and their descriptions, see view (Displays
Information) on page 6-25 .
Setting Up the Operating Environment
To set up the HDLM operating environment, execute the dlnkmgr command's
set operation. This operation allows you to set up the following functions:
• Load balancing
• Intermittent error monitoring
• Dynamic I/O path control
• Displaying the physical storage system information
• Audit log data collection
For details on how to set up each function, see set (Sets Up the Operating
Environment) on page 6-16 .
For example, to set up the load balancing function, execute the HDLM
command's set operation with the -lb parameter specified. When the
confirmation message is displayed, enter y to execute, or n to cancel the
command.
The following is an example of executing the command:
PROMPT>dlnkmgr -s host-name -u user-name -p password set -lb on -
lbtype exrr
KAPL01049-I Would you like to execute the operation? Operation name
= set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation name =
set, completion time = yyyy/mm/dd hh:mm:ss
PROMPT>
To check whether the settings have been applied, see Viewing the Operating
Environment on page 4-5 .
Viewing License Information
This section explains how to display license information.
4-6
HDLM Operation
Hitachi Dynamic Link Manager (for VMware®) User Guide