HP XP7 Storage - Manual (Page 226)

Return
Code
Explanation
The acquisition of path information has been aborted, because the
path configuration was changed while the system was attempting to
acquire the path information.
Action
Refresh the host information, check the path status, and then
perform the operation again.
1033 Details
An attempt to acquire the HDLM version information failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2 .
1034 Details
An attempt to acquire information about the HDLM version or SP
version has failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2 .
1035 Details
An attempt to acquire information about the HDLM version or SP
version has failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2 .
1036 Details
An attempt to acquire information about the HDLM version or SP
version has failed.
Action
Re-execute the command. If the same error occurs again, execute
the DLMgetras utility for collecting HDLM error information, and then
contact your HDLM vendor or maintenance company if there is a
maintenance contract for HDLM. For details on the DLMgetras utility,
see The DLMgetras Utility for Collecting HDLM Error Information on
page 7-2 .
1037 Details
A parameter is invalid.
8-62
Messages
Hitachi Dynamic Link Manager (for VMware®) User Guide