HP Compaq t5710 Thin Client - Manual (Page 96)

6-36
Setup Menus
Telserv Format
Factory default: Selected
The setting of this option determines how network data is treated. When selected, data
will be treated in Tandem network server (Telserv) format. When unselected, data will
be treated in serial format.
Return Function
Factory default: Unselected
This option specifies whether or not the function of the Enter key is defined by the
application when in Block mode. When selected, the key is regarded as an application
specific function key. Normally this should be unselected.
Bell On
Factory default: Selected
This option enables or disables an audible tone which is heard when the emulation
warns you about something. This needs to be selected when you want to use the Bell
Column feature.
Bell Column
Factory default: 0
This option enables you to specify a particular column on the display which will cause
an audible warning to sound when the cursor passes through it.
The valid range of column numbers is 1 to 80. Setting this option to 0 will disable the
feature. The Bell On option must be selected for this feature to work.