HP Compaq t5710 Thin Client - Manual (Page 15)

2-3
Getting Started
For a TCP/IP connection, click the TCP/IP button and enter the name or internet
address of the host computer in the Host Name box. Selecting the Host Rollover
On Connection Fail option will present four Host Name entry boxes. The
emulator will attempt to connect to each specified host in turn until one is success-
ful. Click Advanced for Telnet options. Refer to the TCP/IP Connection Settings
section later in this chapter for details.
For a serial connection, click the Serial button, specify the communications port in
the Connect To box, then click Advanced for additional serial options. Refer to
the Serial Connection Settings section later in this chapter for details.
The IBM 3270 emulation enables you to specify up to four hosts and you can use
keyboard commands to switch between the sessions as described in the IBM
3270 Emulation chapter. Enter the name or internet address of the host
computer(s) in the Host box(es), then click Advanced for Telnet options. Refer
to the TCP/IP Connection Settings section later in this chapter for details.
Make the relevant selections then click OK to return to the Host Information
dialog box, then click Next to display the Automate Login Process dialog box.
8. The Automate Login Process dialog box gives you the option to automate part or
all of the host login procedure. Refer to the Automate Login Process section later
in this chapter for details.
Make the relevant selections if required then click Next to display the Printer Port
Settings dialog box.
9. The next dialog box in the Connection Wizard enables you to specify Printer Port
Settings. Refer to the Printer Port Settings section later in this chapter for details.