HP Compaq t5710 Thin Client - Manual (Page 36)

2-24
Getting Started
The Output Character Set option enables you to specify the character set used for
printing when Print Direct To Port is selected. This allows non-ISO Latin-1 printers
to be used.
Selecting Auto Line Feed will cause the printer to print at the beginning of the next
line when a carriage return command is received.
When a serial port is selected, clicking the Configure button will display a dialog box
in which you can specify the baud rate, parity, flow control, data bits and stop bits
settings. These options are described in the Serial Settings section.
Direct Print Data To A Network Printer
To direct print data to a printer on the network, select Use Network Printer (LPR)
and enter the LPD Hostname. Clicking the Configure button will display a dialog
box which enables you to specify various print settings.
You must specify the Printer Name. The Job Name and User Name entries are
optional (the User Name will default to root if none is specified). You can specify
how many times the LPR protocol will attempt to execute the print job before
cancelling by setting the number of Retries and the number of seconds delay between
each attempt. When Add Banner is selected, information about this print job will be
printed with it. You can display a message box which will indicate the progress of the
print job by selecting Debug Information.