HP Systems Insight Manager - Manual (Page 39)

IMPORTANT: Consider the following before you disable port 2301:
If you disable port 2301 when HP SMH is in autostart URL mode, the start mode automatically changes
to start on boot mode. ▲
To disable Port 2301, complete the following steps:
1. Select Settings from the menu.
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, clear the Enable Port 2301 check box.
5. Click Apply.
To enable Port 2301, complete the following steps:
1. Select Settings from the menu
2. In the System Management Homepage box, click the Security link.
3. Click the Port 2301 link.
4. In the Configuration box, select the Enable Port 2301 check box.
5. Click Apply.
Timeouts category
The Timeouts link provides options to configure the values of the Session timeout and UI timeout.
3 2 1 Apply
Records the chosen values into the
XML configuration file.
UI timeout
The UI timeout value
represents the maximum
amount of time in seconds that
the SMH user interface (UI)
waits for data requested from
webapps. Users with
Administrator access can set
the session timeout to between
1 and 60 minutes. The default
value is 15 minutes. Users with
Administrator access can set
the UI timeout to between 10
and 3600 seconds. The
default value is 20 seconds.
Session timeout
The session timeout value
represents the amount of time
in minutes that a user can
remain inactive in an SMH
session. If a user logs in and
remains inactive for an amount
of time greater than that
specified by session timeout,
the user is redirected to the
Sign In page in their next
interaction with the user
interface.
The following table presents the range of values available for timeouts, with their respective units:
System Management Homepage Box 39