HP XP7 Storage User Manual
Page 110
Description
Error code (SSB2)
The command was rejected because the Cnt Ac-J program product was not installed in the primary
system.
EB6E
The command was rejected because the specified S-VOL is assigned to a copy pair of other
program products.
EB70
The command was rejected because the specified S-VOL is the system disk.
EB73
The command was rejected because all mainframe connection CHAs are blockaded.
EB74
The command was rejected because the specified data volume is a command device.
EB78
The command was rejected because the specified data volume is online.
EB79
The command was rejected because the journal cache of the restore journal was remained.
EB7A
The command was rejected because the specified S-VOL is an external volume.
EB7D
The command was rejected because the specified S-VOL is in one of the following statuses.
EB7E
•
The specified S-VOL is being used for a Business Copy pair.
•
The specified S-VOL is a reserved volume.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is being used as Business
Copy P-VOL.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is the source volume of
Auto LUN.
•
Cnt Ac-J P-VOL and S-VOL are THP V-VOL, and the specified S-VOL is being used as Fast Snap
P-VOL.
The command was rejected because the emulation type of the specified S-VOL was unsupported.
EB7F
The command was rejected because the specified volume was the V-VOL or the pool-VOL. Please
check the status of the volume.
EB80
The command was rejected because the path from the secondary system to the primary system
is not set, or the volume used as the S-VOL is not paired.
EB87
The command was rejected because of one of the following:
EB88
•
The specified S-VOL was being used as a Business Copy S-VOL.
•
The specified S-VOL was Not Ready, which means that the data drive cannot be used.
The command was rejected because the emulation types of the specified P-VOL and S-VOL were
not the same.
EB89
The command was rejected because the emulation types of the specified master journal and the
restore journal were not the same.
EB8A
The pair cannot be created because the S-VOL is in a LUSE configuration.
EB8E
The command was rejected because the specified pair could not transit the status.
EB94
The command was rejected because the specified S-VOL was not mounted on the secondary
system.
EB9F
The command was rejected because the specified S-VOL was not mounted on the secondary
system.
EBA0
The command was rejected because the volume specified for the secondary volume was in either
one of the following status.
EBA7
•
Increasing the capacity by Thin Provisioning.
•
Releasing the page of Thin Provisioning.
•
Initializing the pool of Thin Provisioning.
110
Cnt Ac-J troubleshooting