HP XP7 Storage - Manual (Page 103)

Description Error code (SSB2)
The pair cannot be created because of the one of following reasons: 8C1E
• The microcode version of the specified primary storage system does not support connection
with the specified secondary storage system.
•
The specified primary storage system does not support connection with the specified secondary
storage system
The pair cannot be created because the virtual ID is not set for the specified S-VOL. 8C1F
The request to update options was rejected because the specified journal ID or mirror ID is
incorrect. 8C20
The pair cannot be created because the specified volume was an external volume. 8F00
The command was rejected because an internal logical error occurred. 8F04
The pair cannot be created because the specified P-VOL is one of the following: 8F10
•
A BC S-VOL that is not in PSUS status
• A BC volume in Reverse Copy status
The pair cannot be created. The processing of volume migration could not be stopped because
the P-VOL was being migrated by Auto LUN. 8F11
The pair cannot be created because the specified volume was in the state of online from the host. 8F17
The pair cannot be created because the specified volume was used in a pair on another program
product. 8F18
The pair cannot be created because the emulation type of the specified volume was unusable. 8F19
The pair cannot be created because the specified P-VOL is already paired. 8F1B
The pair cannot be created because the specified P-VOL is not in the PSUS status. 8F1C
The pair cannot be created or resynchronized because of the one of following reasons. 8F21
•
The specified volume was a Cnt Ac-S P-VOL.
• The specified volume was a Cnt Ac-S S-VOL belonging to a consistency group consisting of
multiple primary and secondary storage systems.
•
Unavailable configuration of the status transition.
The pair cannot be created because a path between the devices was not created. 8F24
The pair cannot be created or resynchronized because PIN was existed in the specified volume. 8F25
The pair cannot be created or resynchronized because it could not access to the specified P-VOL
or S-VOL. 8F28
The pair cannot be created because the specified master journal was unusable. 8F29
The pair cannot be created because the specified P-VOL is a Flash Copy S-VOL. 8F2A
The pair cannot be created because the protect attribute of the Data Retention was set for the
specified P-VOL. 8F2B
The pair cannot be created because the specified volume was used in a pair on the Continuous
Access Synchronous or the Business Copy. 8F33
The pair cannot be created because the specified volume was blocked. 8F35
The following programs for OPEN systems might not be installed, or the licenses of them might
be expired. Please confirm settings for: 8F38
• Continuous Access Synchronous
•
Continuous Access Journal
The pair cannot be created because the program product of Cnt Ac-J was not installed. 8F39
Troubleshooting with RAID Manager 103