HP LaserJet M9040M9050 Multifunction Printer series - Manual (Page 53)

Menu item Sub-menu item Sub-menu item Values Description
[output device menu]
NOTE: This menu
varies depending on
the output device
installed.
Use this menu to set the finishing options for
the installed output device.
General Copy
Behavior Hold Off Print Job On
Off
Prevents print jobs from beginning to print
while a walk-up user is setting up a job.
Hold Off Time Prevents non-copy print jobs from starting for
a specified time after a copy job is completely
printed.
Scan Ahead Enabled (default)
Disabled
Use this feature to turn on no-wait scanning.
With
Scan Ahead enabled, the pages in the
original document are scanned to disk and
held until the device becomes available.
Auto Print Interrupt Enabled
Disabled (Default)
When this feature is enabled, copy jobs can
interrupt print jobs that are set to print multiple
copies.
The copy job is inserted into the print queue
at the end of one copy of the print job. After
the copy job is complete, the device
continues printing the remaining copies of the
print job.
Copy Interrupt Enabled
Disabled (Default)
When this feature is enabled, a copy job that
is currently printing can be interrupted when
a new copy job is started. You are prompted
to confirm that you want to interrupt the
current job.
Alternative
Letterhead Mode Off (default)
On
Enable this feature to load letterhead or
preprinted paper into the tray the same way
for all copy jobs, whether you are copying to
one side of the sheet or to both sides of the
sheet. When this option is selected, load the
paper as you would for printing on both sides.
The device speed slows to the speed
required for printing on both sides.
Table 2-14 Device Behavior menu (continued)
ENWW Use the Administration menu 39